How to Make a Christmas Apron
Sew a festive Christmas apron using just 90 cm of fabric, matching thread and a pair of jingle bells. This easy pattern combines a rectangular skirt, a simple bib, a neck strap and long waist ties for a practical apron with a cheerful seasonal finish.
The original pattern is designed to suit approximately sizes 10–18, but the measurements can be adjusted to create a smaller or larger apron.
Project Details
- Project number: 2605
- Difficulty: Easy
What You Will Need
Materials
- 90 cm of Christmas fabric
- Matching thread
- 2 jingle bells
- 1 button
Equipment
- Sewing machine
- Fabric scissors
- Iron and ironing board
- Pins
Cut the Fabric Pieces
- Lay the fabric flat and cut it horizontally through the centre, parallel to the selvedge.
- Reserve one of these large pieces for the skirt section, labelled Piece A.
- From the remaining fabric, cut one rectangle measuring approximately 35 cm wide × 66 cm high. This will form the bib, Piece B.
- Cut eight horizontal strips from the remaining fabric. These strips will be joined to create the neck strap and waist ties.
Sew the Apron Body
- Hem all four edges of the skirt piece.
- Fold the bib piece in half with right sides facing.
- Sew around the bib, leaving a small opening for turning.
- Turn the bib right side out and press it flat.
- Topstitch around the edges for a neat finish.
- Position the bib centrally over the middle of the skirt, with the shortest edges at the top and bottom.
- Sew the bib and skirt together.
Make the Neck Strap
- Take one fabric strip and fold it in half lengthwise with wrong sides facing.
- Sew a narrow hem at one short end and along the long edge.
- Trim the corners, turn the strip right side out and press it flat.
- Tuck the remaining raw edge inside and topstitch around the strap.
- Attach one end of the strap to the upper right-hand side of the bib.
- Leave the opposite end free so it can fasten with the button on the apron.
Make the Waist Ties
- Join five of the fabric strips together at their short ends to create one long tie.
- Press the joined seams flat.
- Fold the long tie in half lengthwise with wrong sides facing.
- Sew a narrow hem at one end and along the full length.
- Trim the corners, turn the tie right side out and press.
- Tuck the remaining raw edge inside and topstitch around all edges.
- Find the centre of the long tie and position it across the apron where the bib meets the skirt.
- Sew along the upper and lower edges of the tie to secure it to the apron.
Add the Finishing Details
- Sew a button to the upper section of the apron so the neck strap can be fastened.
- Sew two jingle bells securely to the end of one waist tie.
- Press the completed apron before wearing.
Helpful Tips
Check the bib height and waist-tie position against the wearer before sewing them permanently in place.
Attach the jingle bells securely and remove them before washing if the bell material is not machine washable.